Performance Checks; Re-Use - Sunrise Medical QUICKIE Q100R General Manual

20.0 Performance checks:

After performing any maintenance or repairs on the wheelchair
you must make sure that it is functioning correctly before it is
used.
• Visually inspect the wheelchair to make sure the legrests,
armrests etc are correctly positioned and attached to the
wheelchair and all fasteners are sufficiently tightened.
• Make sure that the backrest is correctly fitted and adjusted.
• Make sure that all of the cushions are in place.
• Switch on the hand control – Do the lights flash? This signifies
that there is a fault in the electronic system. Refer to section
8.0 for basic troubleshooting.
• Perform the parking brake check.
• Operate all of the electric options, including lights and
indicators (if fitted) to make sure that they work correctly.
• Drive the wheelchair in each of the drive profiles, (if installed),
to make sure the wheelchair performs as it did before.
Maintenance and Inspection Schedule
Check battery level indicator and charge if necessary.
Check the joystick of the hand control is not bent or damaged.
Ensure all removable parts / wing screws are securely fastened.
Check lapstrap for wear and make sure the buckle is operational.
Parking brake test.
Check tyres and inflate.
Ensure the fasteners on the seat depth adjustment are tight,
Ensure all cables and connectors are sound and are tidy and out of the way.
Clean wheelchair and upholstery.
Battery terminal inspection – Remove any corrosion and apply Vaseline.
Check upholstery, seating, headrests, armpads and calfpads for wear.
Complete inspection, safety check and service should be made by a Sunrise Medical
authorised dealer.
WARNING!
If you are in any doubt about the performance requirements
of your wheelchair contact your Sunrise Medical authorised
dealer.
NOTE: Only the tasks in the GREEN boxes below should be
attempted by the user. If you are in any doubt, please contact
your Sunrise Medical authorised dealer.

20.1 Re-use

Due to its construction the Q100R/Q200R is ideal for inside
use (low seat height, compact dimensions) as well as outside
use, (lights, 55Ah batteries, etc.).
Its high level of flexibility, due to the number of possible
adjustments, and the modular platform technology (modular
construction system) make the Q100R/Q200R ideal for re-use.
Individual modules (seat tilt in space, backrest angle
adjustment) can be fitted and removed very quickly and within
the seating system there are a range of possibilities so that
individual adjustments can be made to suit the end user.
Optional mounting of the operating unit on the left or right
side of the chair, with the possibility of changing later, and
adjustable distance from the backrest.
Q100R-Q200R Configured Rev. A
63