Quickie
®
XTENDER
Supplier:
This manual must be given to the rider of this wheelchair.
Rider:
Before using this wheelchair read this entire manual and save
for future reference.
®
Quickie
XTENDER
Distribuidor:
Este manual debe ser entregado al pasajero de
esta silla de ruedas.
Pasajero:
Antes de usar esta silla de ruedas, lea este
manual en su totalidad y guárdelo para futura
referencia.
Cada una de las sillas se envía con un manual de instrucciones en inglés. El manual en español
o francés está disponible en formato PDF en nuestra página en Internet:
www.SunriseMedical.com. Ingrese a la página del producto específico para descargar el manual,
o comuníquese con el proveedor autorizado de Sunrise Medical.
Quickie
®
XTENDER
Au Fournisseur: Ce manuel doit être remis à l'usager de
ce fauteuil roulant.
À l'Usager :
Veuillez lire tout le manuel et le conserver
pour référence ultérieure.
Chaque fauteuil est livré avec un manuel d'instructions en anglais. Les versions en espagnol
et en français sont à votre disposition en format PDF sur le site : www.SunriseMedical.com.
Veuillez vous rendre à la page de votre produit pour télécharger le manuel dans la langue
souhaitée, ou contactez un fournisseur agréé Sunrise Medical.
S E
T I O N
E N G L I S H
QUICKIE XTENDER
O w n e r ' s M a n u a l
M a n u a l d e I n s t r u c c i o n e s
M a n u e l d ' i n s t r u c t i o n s
Need help?
Do you have a question about the Quickie XTENDER and is the answer not in the manual?
Questions and answers
How do you replace worn tires ?
To replace worn tires on a Sunrise Medical Quickie XTENDER:
1. Ensure Safety – Place the wheelchair on a flat, stable surface.
2. Remove the Wheels – Pull up on the quick-release handle to disengage the detent balls and remove the rear wheels.
3. Check Tire Pressure – If the tires are pneumatic, ensure they are properly inflated before replacing.
4. Install New Tires – Replace the worn tires with new ones, ensuring they are properly mounted.
5. Reattach the Wheels – Insert the axle into the axle sleeve until the detent balls engage, locking the wheel in place.
6. Secure All Bolts and Nuts – Check that all nuts, bolts, and spokes (if applicable) are tight.
7. Test the Wheelchair – Ensure proper function and wheel alignment before use.
If you encounter issues, consult an authorized dealer or refer to the owner’s manual.
This answer is automatically generated