Table of Contents
Advertisement
S Y S T E M M E N U
Menu
Addr
A001-A512
NodE
nodn
NASt/SLAu
r255
R000-R255
G255
G000-G255
b255
B000-B255
Co00
Co00-Co32
S255
S000-S255
t255
T000-T255
rAnd
SPEED 000-255 Random Internal Program Speed setting.
CHAG
SPEED 000-255 Color Jumper program speed setting.
SPEED 000-255 Color Gradient program speed setting.
PuSE
CHAS
SPEED 000-255 Color Pulse program speed setting.
Soun
Sens
rESt
tInE
S 00
Option
Starting DMX address channel. 001-512
CH03
CH05
Select CH03, CH05, CH07 and CH10 DMX channel modes.
CH07
CH10
blAC
Blackout when DMX signal is lost.
Intr
Defaults to internal programs when DMX signal is lost.
SEtt
Defaults to manual settings when DMX signal is lost.
HoLd
Holds last state when DMX signal is lost.
When Slave is set to ON, the unit will be controlled by the
SLAu
Master unit that is connected in line to it.
NASt
Unit will be set to Master and will act as the host for other units.
Manually set the RED 0-255
Manually set the GREEN color tone.
Manually set the BLUE color tone.
Color Macros take priority over all manual RGB settings and will
be stored and do not reset after a power cycle.
See pages 32-33 for Macro Color Values.
Manually set the Strobe effect.
Manually set the Master Dimming.
000-255 Voice Sensitivity setting.
RESET - Press and hold ENTER button for a few seconds to
REST
restore factory settings.
000H
Total panel usage time.
000H
Total panel power-ON time.
S 00
Software version: 00
Function / Instruction
20
Advertisement
Table of Contents
