Table of Contents
Advertisement
I N S T A L L A T I O N I N S T R U C T I O N S
PANEL SET UP INSTRUCTIONS
19.3" (490mm)
4. Lay out a grid of Panel Floor Brackets, noting that one Panel Floor Bracket is required for each
corner where a panel or a ramp come into contact with each other. Panel Floor Brackets
should be spaced approximately 19.3 inches (490mm) apart from edge to edge in both
left-to-right and front-to-back directions. For reference, see the diagram above, which shows
the Panel Floor Bracket layout for a 3x3 panel system.
14
Advertisement
Table of Contents
