System Menu - ADJ UV LED BAR20 IR User Instructions

S Y S T E M M E N U
The display will lock after 30 seconds. Press the MODE button for 3 seconds to unlock.
LED Display On/Off: To make the display stay ON all of the time press the MODE until "ds-X" is
displayed. Press the UP button so that "ds-1" is displayed. The LED display will stay ON all of the
time. To make the display turn OFF after 10 seconds, press the UP button so that "ds-2" is displayed.
When the LED display turns OFF after 10 seconds, press any button for at least 3 seconds to turn the
display on again.
DMX Mode:
The UV LED Bar20 IR has 3 DMX modes: 1 Channel Mode, 2 Channel Mode, and 3 Channel Mode.
1. This function will allow you to control individual fixture traits.
2. Use the MODE button to scroll through the DMX Channel modes. The Channel modes are listed
below:
To run the 1 Channel Mode, press the MODE button until "1XXX" is displayed. "XXX" is the current
•
displayed DMX address. Use the UP or DOWN buttons to find your desired DMX address.
• To run the 2 Channel Mode, press the MODE button until "2XXX" is displayed. "XXX" is the current
displayed DMX address. Use the UP or DOWN buttons to find your desired DMX address.
To run the 3 Channel Mode, press the MODE button until "3XXX" is displayed. "XXX" is the current
•
displayed DMX address. Use the UP or DOWN buttons to find your desired DMX address.
3. Once you have found your desired DMX Channel mode and address, plug in the fixture via the
XLR connections to any standard DMX controller.
Static Mode:
In this mode, the UV light remains static, and its intensity can be adjusted.
1. Plug the fixture in and press the MODE button until "4XXX" is displayed.
2. Press the UP or DOWN buttons to adjust the intensity of the light.
Strobing:
In this mode, there are 3 different shows to choose from, or a sound active mode. When running one
of the seven available programs, the program speed can be adjusted.
1. Plug the fixture in and press the MODE button until "5-XX" is displayed. "XX" represents the
current strobe style.
2. Use the UP or DOWN buttons to select one of the three programs. If you want to run sound active
mode, press the UP or DOWN buttons until "S-So" is displayed.
3. To adjust the speed of your selected program, press the MODE button once more so that "SP-X"
is displayed. Use the UP or DOWN buttons to adjust the speed. 1 is the slowest, 9 is the fastest.
Dimming Curve:
Use this mode to set the dimming curve when used with DMX mode. The dimming curves are in the
order they appear in the diagram.
1. Plug the fixture in and press the MODE button until "dr-X" is displayed. This is the dimmer setting.
"X" represents the current dimming setting.
2. Use the UP and DOWN buttons to find your desired dimming curve. Press the MODE button when
you are finished.
10