Page 2
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
Introduction: The ADJ MOD TW100 is a DMX intelligent, high powered LED par fixture. This fixture seven be used in a stand alone set up or connected in a Master/Slave set up. The MOD TW100 has seven operating modes: Sound Active mode, Auto Run mode, Color Change mode, Color Fade mode, CW/WW/Amber Dimmer mode, Static Color mode, and DMX controlled.
MOD TW100 Warranty Registration The MOD TW100 carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package.
C. The fixture has been exposed to rain or water. D. The fixture does not appear to operate normally or exhibits a marked change in performance. E. The fixture has fallen and/or subjected to extreme handling. ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 5...
DOWN BUTTON SET UP BUTTON DOWN SET UP POWER IN DMX IN DMX IN DMX IN POWER IN DMX OUT POWER OUT POWER OUT DMX OUT DMX OUT ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 6...
INPUT INPUT modes. The DMX address is set on the rear panel of the MOD TW100. Your unit and your DMX controller require a standard 3-pin XLR connector for data input and data output (Figure 1). We recommend Accu-Cable DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be purchased at almost all pro lighting stores).
Page 9
Pin 1 Data Compliment (- signal) Pin 2 Pin 2 Data True (+ signal) Pin 3 Pin 3 Not Used Do Not Use Not Used Do Not Use ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 8...
In the case of the MOD TW100, when in 5 Channel you should set the starting DMX address of the first unit to 1, the second unit to 6 (5 + 1), the third unit to 11 (6 + 5), and so on. (See chart below for more details.)
PULSE STROBING SLOW - FAST 160 - 191 LED ON 192 - 223 RANDOM STROBING SLOW - FAST 224 - 255 LED ON MASTER DIMMER 0 - 255 0% - 100% ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 10...
Page 12
103 - 153 COLOR CHANGE MODE 154 - 204 COLOR FADE MODE 205 - 255 SOUND ACTIVE MODE 8 CHANNEL MODE DMX TRAITS CONTINUED ON THE NEXT PAGE ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 11...
Page 13
SOUND ACTIVE MODE 7 224 - 255 SOUND ACTIVE MODE 8 PROGRAM SPEED/SOUND SENSITIVITY 0 - 255 PROGRAM SPEED SLOW - FAST 0 - 255 SOUND SENSITIVITY LEAST - MOST SENSITIVE ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 12...
Page 14
103 - 153 COLOR CHANGE MODE 154 - 204 COLOR FADE MODE 205 - 255 SOUND ACTIVE MODE 9 CHANNEL MODE DMX TRAITS CONTINUED ON THE NEXT PAGE ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 13...
Page 15
SOUND ACTIVE MODE 7 224 - 255 SOUND ACTIVE MODE 8 PROGRAM SPEED/SOUND SENSITIVITY 0 - 255 PROGRAM SPEED SLOW - FAST 0 - 255 SOUND SENSITIVITY LEAST - MOST SENSITIVE ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 14...
Page 16
Channel 8 will control the color fade speed. When Channel 6 is between the values of 205-255, Channel 7 is in Sound Active Mode, and Channel 8 will control the sound sensitivity. ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 15...
LCD backlight will be off after 20 seconds OPTION IR:ON IR remote function on OPTION IR:OFF IR remote function off OPTION SYSRESET Initialize the unit at the extra factory setting ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 17...
Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs. The MOD TW100 has 5 DMX modes: 3 channel mode, 4 channel mode, 5 channel mode, 8 channel mode, and 9 channel mode. See pages 10-15 for each modes DMX traits.
Page 20
3. Press the SET UP button and “SENS: XX” will be displayed. Use the UP and DOWN buttons to adjust the sound sensitivity. The sensitivity can be adjusted between “00” (least sensitive) to “08” (most sensitive). ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 19...
Page 21
• “MANUA” (Manual) - if the DMX signal is lost or interrupted, the unit will automatically go into the last color set up in manual dimmer mode. 3. Press the UP or DOWN buttons to scroll through and select your desired DMX state. ADJ Products, LLC - www.adj.com - MOD TW100 User Manual Page 20...
ADJ UC IR & Airstream: This function is used to activate and deactivate the infared sensor. When this function is activated the unit can be controlled using the ADJ UC IR or Airstream IR app. Please see page 22 for remote controls and functions.
The UC IR infrared remote gives you control of various functions (See below). To control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away. To use the ADJ UC IR you must first activate the fixtures infrared sensor, to activate the sensor please see the instructions on page 21.
MOD TW100 Frost Filter The MOD TW100 comes with 3 interchangeable frost filters. To install the frost filter unscrew the four thumb screws holding lens in place. Remove the lens and install the filter inside the unit. Line up the thumb screw holes on the edges of filter with screw holes of the unit.
The maximum that can be connected is 5 fixtures @ 120V and 9 fixtures @ 240V. After the maximum connected fixtures you will need to use a new power outlet. NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO THE MOD TW100 AS THE POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!
ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
MOD TW100 Specifications Model: MOD TW100 Voltage: 100V ~ 240V/50~60Hz LEDs: 7 x 15W 3-in-1 LED’s Working Position: Any safe working position Power Draw: 105W Power Linking: 5 Fixtures Max. @ 120V 9 Fixtures Max. @ 240V Weight: 6 lbs./ 2.7 Kgs.