Table of Contents
Advertisement
S Y S T E M M E N U
Manual Color Mode: Used to manually control the tone of each individual color.
1. Press the MENU button to cycle through the available color options, which are displayed as "X000"
– "X255" where "X" represents the color (R, G, or B) and 000-255 represents the current tone for
Press the ENTER button to select which color you would like to set.
that color.
Use the UP or DOWN button to set the color tone. Press the ENTER button to accept.
2.
• R000-R255 = Manually set the Red color tone.
• G000-G255 = Manually set the Green color tone.
• B000-B255 = Manually set the Blue color tone.
Color Macro Mode: Used to select from a list of 32 pre-programmed color macros. See the Macro
Color Values for RGB Fixtures section on pages 27-28 for the full list of color macros, their color
compositions, and their assigned DMX values.
1. Press the MENU button until "CoXX" is displayed, where "XX" is a number from 01-32
corresponding to the assigned DMX value of the currently selected color macro. Press the ENTER
button to configure the Color Macros Mode.
2. Use the UP and DOWN buttons to select the value of the desired color macro. Press the ENTER
button to accept.
Strobe Effect:
1. Press the MENU button until "SXXX" is displayed, where "XXX" is a value between 000 and 255.
Press the ENTER button to select the Strobe effect.
2. Use the UP or DOWN buttons to adjust your desired strobe effect between 000-255 then press
the ENTER button to select your desired setting.
Total Dimming Effect:
1. Press the MENU button until "TXXX" is displayed, where "XXX" is a value between 000 and 255.
Press the ENTER button to select the Total Dimming effect.
2. Use the UP or DOWN buttons to adjust your dimming effect between 000-255 then press the
ENTER button to select your desired setting.
22
Advertisement
Table of Contents
