Table of Contents
Advertisement
S Y S T E M M E N U
Other Program Select Mode: There are five additional programs to choose from (Random
Program, Color Jumper, Color Gradient, Color Pulse, and Sound Sensitivity).
1. Press the MENU button to cycle through the different programs in the main menu. Press the
ENTER button to select the program. The programs are denoted as follows on the screen:
• Random Program: "Rand"
• Color Jumper: "CHAG"
• Color Gradient: "PuSE"
• Color Pulse: "CHAS"
• Sound Sensitivity: "Soun"
2. The screen will then display either "SPEd" or "SEnS" depending on which program is selected.
Press the ENTER button again to accept.
3. Use the UP and DOWN buttons to adjust the speed or sensitivity level of the selected program
from 000-255, with 000 being the slowest/least sensitive and 255 being the fastest/most sensitive.
Press the ENTER button again to accept. Do NOT press MENU again to return to the main
system menu, as this will take the panel out of the program mode you have just selected.
Reset: Resets the unit to factory settings.
1. Press the MENU button until "REST" is displayed. Press the ENTER button to begin the reset
process.
2. Long press the ENTER button to confirm the reset and restore the unit to factory settings.
Usage Time:
Press the MENU button until "TinE" is displayed. Press the ENTER button to view total
product usage time and total product power-on time.
Software Version:
view current software version.
Press the MENU button until "S 00" is displayed. Press the ENTER button to
23
Advertisement
Table of Contents
