ADJ MDF2-9SYS User Manual page 18

I N S T A L L A T I O N I N S T R U C T I O N S
Power Supply
DMX Console
Ramps
Power Supply
1
5
3
6
4
2
Panel 1 à Panel 2: Correct. Both panels receive both power and DMX data.
Panel 3 à Panel 4: Incorrect. The top panel is rotated, and connections do not line up with the ramp,
and therefore the panel will not receive a signal from the ramp. Any panel(s) installed below the top
row will not receive a signal regardless of orientation.
Panel 5 à Panel 6: Incorrect. The top panel is facing the opposite direction of the power and data
flow, and therefore the panel will not receive a signal from the ramp. Any panel(s) installed below the
top row will not receive a signal regardless of orientation.
NOTE: The actual panels do NOT have arrows on the lighting surface. Instead, the arrows are located
along the sides of the panels. In the above drawings, arrows are depicted on the lighting surface
solely for the sake of clarity.
18