Stage Installation - Leica EM ACE600 Operating Manual

3.9.

Stage installation

The coater is delivered, according to the configuration, either with a rotating stage
(tilt and height are manual, rotation is automated) or motorized stage (tilt, height
and rotation are automated) already installed. The stage distance from the source
can be set between 30 and 100 mm, the maximal tilt is ±60°. When tilted the
range for the stage distance is limited to 45 to 100 mm. The stage can hold up to
24 SEM stubs. A stage for two glass slides or a planetary drive stage is available
as an option, which is easily installed by exchanging the table.
Cover the connections of the motorized stage with the delivered covers.
The motor spindle is covered and secured with a screw.
Operating Manual Leica EM ACE600 Version 01/19 Page 32