Safety Measures At The Installation Site; Qualification Of Operating Personnel; Residual Hazards - Leica EM ACE600 Operating Manual

2.4.2 Safety measures at the installation site

The following measures must be implemented to prevent incorrect use:
 A technically qualified person must carry out connecting to electricity and
gas.
 Gas bottles must be secured and stand upright when connected. A
technically qualified person must connect the system to the gas supply.
 Repairs may only be made by Leica authorized service staff or authorized
representatives.
 If the Leica EM ACE600 coating system is installed incorrectly, the system
may be damaged and may incur injury to the user
Maintenance and Service may only be conducted by technicians authorised
only by the manufacturer's service department.
Leica EM ACE600 coating system should not be operated unless all safety
regulations, technical requirements and conditions are fulfilled.

2.4.3 Qualification of operating personnel

The operating personnel must be familiar with and follow the recognized rules for
safety at work.
The operating personnel responsible for operating and maintaining the Leica EM
ACE600 coating system must satisfy the specific professional requirements for
their respective duties.
The operating personnel must have received training and must be familiar with the
duties that have been assigned to them and for which they are responsible.

2.4.4 Residual hazards

The Leica EM ICE ACE600 coating system represents the latest technology and
conforms to recognized safety regulations: even so, hazards still exist.
All modifications and conversions to the system are prohibited!
Only accessories which meet the manufacturer's specifications shall be used.
Electrical socket acts as disconnecting device. Make sure an easy access to the
disconnecting device is granted.
Install or update software only with data media supplied by Leica
Microsystems.
The Leica EM ACE600 must not be used to process any hazardous materials,
such as radioactive, highly corrosive, explosive, toxic or human pathogenic
substances. The machine must not be used for medical or in-vitro-
diagnostic applications unless specifically certified for this purpose by the
local authorities.
Operating Manual Leica EM ACE600 Version 01/19 Page 10