Eccentric Quartz Holder - Leica EM ACE600 Operating Manual

Connect the plug of quartz measuring cable to the feed through in the rear right of
the coating chamber.
When using a holder to mount the quartz on the side of the stage (see images
under 3.8.1), do not forget to change the settings from quartz on stage to quartz
on side as described in 4.1.
Changing the quartz crystal should be done when the quartz holder is not
mounted. This is to prevent any unintentional turning of the head against the
cable, which can lead to a broken cable.

3.8.1 Eccentric quartz holder

When installing the holder to place the quartz on the side of the stage, please
make sure it slides into the gap all the way in.
Operating Manual Leica EM ACE600 Version 01/19 Page 30