Scanning Stations; Manual Tune - TechniSat DIGITRADIO 580 Instruction Manual

primary station (a "<<" symbol is before the name of the station) in the station list.
To select the secondary station, turn SCROLL/SELECT/SNOOZE knob until you find the secondary service you
want, then press SCROLL/SELECT/SNOOZE knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.

8.3 Scanning Stations

Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select "Scan", and then press SCROLL/SELECT/
SNOOZE knob to full scan.

8.4 Manual Tune

This can help you when adjusting your antenna or when adding stations that were missed while auto tuning.
1. Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select "Manual tune", and then press SCROLL/
SELECT/SNOOZE knob to confirm, the display will show the channel number and frequency.
2. Turn SCROLL/SELECT/SNOOZE knob to select the channel you wanted, and then press SCROLL/SELECT/
SNOOZE knob to confirm.
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name after a few seconds. The new stations will be
added to station list automatically.
3. To play the station, first press BACK button repeatedly to exit manual tune.
36 36