Audio Settings; Storing Preset Stations - TechniSat DIGITRADIO 580 Instruction Manual

9.3 Audio Settings

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-
noise ratio (hiss).
1. To play weak stations in mono, press MENU button, turn SCROLL/SELECT/SNOOZE knob to select "Audio
setting", and then press SCROLL/SELECT/SNOOZE knob to confirm.
2. Display will show "Listen in Mono only?", turn SCROLL/SELECT/SNOOZE knob to select "YES", and then
press SCROLL/SELECT/SNOOZE knob to confirm.

9.4 Storing Preset Stations

Your radio can store up to 12 of your favourite FM stations. This will enable you to access your favourite stations
quickly and easily.
1. While playing your favourite station, press and hold PRESET button until display shows as below:
2. Turn SCROLL/SELECT/SNOOZE knob to cycle through the preset numbers 1-12.
3. Select one preset number and then press the SCROLL/SELECT/SNOOZE knob, display will show "Preset
stored".
4. Preset number "P#" will show on the display.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
41 41