Carry Out A Complete Search; Set Manually; Select Transmitter; Store Dab+ Stations In A Favourite Memory Location - TechniSat DIGITRADIO 22 Operating Instructions Manual

8.2.1 Carry out a complete search

The automatic scan Full scan scans all DAB+ Band III channels and thus
finds all stations broadcast in the reception area.
Once the search is complete, the first station is played in alphanumeric order.
Press the SCAN button (4).
>
The display shows [Search...].
>
During the search, a progress bar and the number of channels found
are displayed.
If no station is found, check the antenna and change the installation
location if necessary (point 5.1).
8.2.2

Set manually

This menu item is used to check the reception channels and can be used to align the
aerial. Furthermore, transmitters can be added manually.
Open the MENU > [Manual search] and press the TUNE/OK rotary
>
knob.
Turn the TUNE/OK rotary knob to select a channel (5A to 13F) and then
>
press it. The signal strength is now shown on the display. If DAB+ stations are
received on a channel, the ensemble name of the stations is displayed. The
aerial can now be aligned for maximum signal strength.
Transmitters whose signal strength is below the required minimum signal
strength do not transmit a sufficient signal. If necessary, align the antenna as
described under point 5.1.
If there are stations on the set frequency or channel that have not yet been
saved in the station list, these will now also be saved.

8.2.3 Select transmitter

Turn the TUNE/OK rotary knob to call up the station list and switch between
>
the available stations. Press the TUNE/OK rotary knob to play the
selected station.
8.2.4

Store DAB+ stations in a favourite memory location

The favourites memory can store up to 20 stations in the DAB+ range.
> First select the desired channel (see point 8.2.3).
15