Selecting Another Station; Secondary Service; Scanning Stations; Manual Tune - TechniSat DIGITRADIO 301 IR Instruction Manual

6.8 Now Playing Information
While a track is playing, the display shows the track and a progress bar with figures for elapsed and total track
time.
To view further information, press INFO button repeatedly to show the information through Artist, Album, Bit
Rate, Codec, Sampling Rate, Playback buffer and Date on the display.
7 Selecting DAB Mode
1. Press MODE button repeatedly to select DAB mode.
2. For initial use, radio will carry out a full scan and store stations list in memory
3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. Turn
SCROLL/SELECT/SNOOZE knob to select you desired station and then press SCROLL/SELECT/SNOOZE
knob to broadcast.
Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a
stronger signal area.

7.1 Selecting another Station

1. While a program is playing, turn SCROLL/SELECT/SNOOZE knob to browse through station list, and then
press SCROLL/SELECT/SNOOZE knob to confirm the station you wanted.
2. Alternatively, while a program is playing, press MENU button, turn SCROLL/SELECT/SNOOZE knob to
select "Station list", and then press SCROLL/SELECT/SNOOZE knob to confirm.
30
3. Turn SCROLL/SELECT/SNOOZE knob to select the station you want to play, and then press SCROLL/
SELECT/SNOOZE knob to confirm.

7.2 Secondary Service

You may see a ">>" symbol after the name of the station, this indicates that there are secondary services
available to that station. These secondary services contain extra services that are related to the primary station.
E.g. a sports station may want to add extra commentaries. The secondary services are inserted directly after the
primary station (a "<<" symbol is before the name of the station) in the station list.
To select the secondary station, turn SCROLL/SELECT/SNOOZE knob until you find the secondary service you
want, then press SCROLL/SELECT/SNOOZE knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.

7.3 Scanning Stations

Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select "Scan", and then press SCROLL/SELECT/
SNOOZE knob to full scan.

7.4 Manual Tune

This can help you when adjusting your antenna or when adding stations that were missed while auto tuning.
1. Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select "Manual tune", and then press
SCROLL/SELECT/SNOOZE knob to confirm, the display will show the channel number and frequency.
2. Turn SCROLL/SELECT/SNOOZE knob to select the channel you wanted, and then press SCROLL/SELECT/
SNOOZE knob to confirm.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
31