Software Update - Over The Network; Setup Wizard - TechniSat DIGITRADIO 580 Instruction Manual

13.8 Software Update – Over the network
From time to time, your radio may make software upgrades available with bug fixes and/or additional features.
If your radio detects that newer software is available, it will ask if you want to go ahead with an update. If you
agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
C A U T I O N
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
connection. Remove power during a software update may permanently damage the unit.
1. Press MENU button > Main menu > System settings > Software update, press SCROLL/SELECT/SNOOZE
knob to confirm.
2. Turn SCROLL/SELECT/SNOOZE knob to select "Auto-check setting", your radio will check periodically for
new version software.
3. Turn SCROLL/SELECT/SNOOZE knob to select "Check now", your radio will now to check new version
software and automatically upgrade the detected new version software.

13.9 Setup Wizard

When this unit is started for the first time, it runs through a setup wizard to configure settings for date/time and
network. Once this has finished, the system is ready to use in most modes.
Redo setup wizard will not erase user settings such as searched stations and presets.
1. Press MENU button > Main menu > System settings > Setup wizard, press SCROLL/SELECT/SNOOZE
knob to confirm.
2. Turn SCROLL/SELECT/SNOOZE knob to select "YES", and then press SCROLL/SELECT/SNOOZE knob to
confirm. Please refer to page 15 for following settings.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
49