Scanning Stations; Manual Tune; Prune Invalid; Drc (Dynamic Range Control) Value - TechniSat DIGITRADIO 580 Instruction Manual

Scanning Stations

Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select 'Scan', and then press
SCROLL/SELECT/SNOOZE knob to full scan.

Manual Tune

This can help you when adjusting your antenna or when adding stations that were missed while
auto tuning.
1. Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select 'Manual tune', and
then press SCROLL/SELECT/SNOOZE knob to confirm, the display will show the channel
number and frequency.
2. Turn SCROLL/SELECT/SNOOZE knob to select the channel you wanted, and then press
SCROLL/SELECT/SNOOZE knob to confirm.
#
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name after a few seconds. The new stations will
be added to station list automatically.
3. To play the station, first press BACK button repeatedly to exit manual tune.

Prune Invalid

You may remove all unavailable stations from the station list.
1. Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select 'Prune invalid', and
then press SCROLL/SELECT/SNOOZE knob to confirm.
2. Turn SCROLL/SELECT/SNOOZE knob to select 'YES', and then press
SCROLL/SELECT/SNOOZE knob to confirm removing all invalid stations.

DRC (Dynamic Range Control) value

If you are listening to music with high dynamic range in a noisy environment (for example classical
music while cooking), you may wish to compress the audio dynamic range. This makes quiet
sounds louder and loud sounds quieter.
1. Press MENU button, turn SCROLL/SELECT/SNOOZE knob to select 'DRC', and then press
SCROLL/SELECT/SNOOZE knob to confirm.
2. Turn SCROLL/SELECT/SNOOZE knob to select 'DRC high', 'DRC low' or 'DRC off', and then
press SCROLL/SELECT/SNOOZE knob to confirm.
26
→