TechniSat DIGITRADIO 580 Instruction Manual page 18

18 18
Push Button You must start the WPS scan on the remote station
(e.g. router). Consult the manual for your router or
Access Points (AP) to learn how to do this.
After you have done this, press SCROLL/SELECT/
SNOOZE knob on the radio and then both devices
will establish a connection
Pin The radio creates an 8-digit number, which you
then have to enter into the remote station.
After entering the PIN, press the SCROLL/SELECT/
SNOOZE knob to establish the connection between
both devices.
Skip WPS In addition to a WPS connection, you can also
establish a connection using a Pre-Shared-Key. The
required key is often on the rear of the router, or
you may have defined it yourself.
This method is used automatically for networks
without WPS. You can call up the Pre-Shared-Key
function on networks with WPS by selecting menu
item "Skip WPS".
An input field should now appear. You can enter
the required key (PSK) by turning and pressing
SCROLL/SELECT/SNOOZE knob, and then select
"OK" and press SCROLL/SELECT/SNOOZE knob
complete the entry. The radio should now establish
the connection to the network.