Dab Mode; Selecting Another Station; Secondary Service; Scanning Stations - TechniSat DIGITRADIO 20 Instruction Manual

DAB Mode

When you turn on the radio it will automatically search and store all the available stations. You
should conduct an additional Full Scan to ensure all stations are picked up and stored. It is
also recommended every few months to run a new scan to pick up any new DAB/DAB+ that
may have begun broadcasting after purchasing your DAB radio.
1. For initial use, radio will carry out a full scan and store stations list in memory.
2. Once the scanning is completed, the DAB/DAB+ stations will be displayed in
alphanumeric order. The first station in the list will be selected to broadcast.
@
if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your
Note:
radio to a stronger signal area.

Selecting another Station

While a program is playing, turn SCROLL/SELECT knob to show station list and select the
station you want to play, and then press SCROLL/SELECT knob to confirm.

Secondary Service

You may see a ">>" symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services
that are related to the primary station. E.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station (a "<<"
symbol is before the name of the station) in the station list.
To select the secondary station, turn SCROLL/SELECT knob until you find the secondary
service you want, and then press SCROLL/SELECT knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary
station.

Scanning Stations

Press MENU button, turn SCROLL/SELECT knob to select 'Full scan', and then press
SCROLL/SELECT knob to automatically scan.
8