Scanning Stations; Manual Tune; Viewing Station Information; Showing Signal Strength - TechniSat DIGITRADIO 20 Instruction Manual

Under cupboard kitchen radio

Hide thumbs Also See for DIGITRADIO 20:

Table of Contents

4.3 Scanning Stations

Press MENU button, turn SCROLL/SELECT knob to select 'Full scan', and then press SCROLL/SELECT knob to

automatically scan.

This can help you when adjusting your antenna or when adding stations that were missed while auto tuning.

Press MENU button, turn SCROLL/SELECT knob to select 'Manual tune', and then press SCROLL/SELECT

knob to confirm, the display will show the channel number and frequency.

Turn SCROLL/SELECT knob to step among the channels and then press SCROLL/SELECT knob select the

current channel.

Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a

tuning meter with the signal strength and the multiplex name after a few seconds.

To play the station, first press MENU button twice to exit manual tune.

DAB/DAB+ stations broadcast additional information. Press VOLUME/INFO knob on the main unit repeatedly to

view information through Scrolling text, Signal strength, Program Type, Ensemble, Frequency, Signal error, Bitrate,

Codec, Audio format, Time and Date.

While you selected signal strength, a signal bar with the strength of the current station will show on the display.

The indicator on the signal bar shows the minimum acceptable signal level.

Table of Contents

Table of Contents