Indications For Use - Otto Bock 17B98-L16 Instructions For Use Manual

INFORMATION
Last update: 2015-01-06
• Please read this document carefully before using the product.
• Follow the safety instructions to avoid injuries and damage to the
product.
• Instruct the user in the proper and safe use of the product.
• Please keep this document in a safe place.

1 Indications for use

The 17B98 System Ankle Joints with Lamination Adapters are to be used
exclusively for lower limb orthotic fittings using specified lamination techniques.
2 Construction / Components
The 17B98 System Ankle Joints with Lamination Adapters can be used
together with the 17B97 System Knee Joints with Lamination Adapters
(please refer to the 647H160 Package Insert).
The foot stirrups have a modified joint head and the ankle joints include
hardened bearing nuts. As with the System lamination joint bars, the joint's
widened surface provides improved anchoring to the fiber composite material.
The joint may be attached to reinforcement material by stitching through
the bore holes.
The two 17Y128=16x80 System Lamination Joints (also available for 20
mm joint width and 100 mm length) provide the proximal connection of dor-
siflexion assist ankle joints using the provided sidebars.
2.1 Components (shown on cover page)
(1)
17B63=L16 System Dorsiflexion Assist Ankle Joints, 16 mm side bar width or
17B63=R16 System Dorsiflexion Assist Ankle Joints, 16 mm side bar width or
17B63=L20 System Dorsiflexion Assist Ankle Joints, 20 mm side bar width or
17B63=R20 System Dorsiflexion Assist Ankle Joints, 20 mm side bar width
(2)
17B99=16 System Foot Stirrups (Lamination Pieces) or
17B99=20 System Foot Stirrups (Lamination Pieces)
(3) 17Y128
=16x80 System Lamination Joints, 3x80 mm, 2 pieces or
17Y128
=20x80 System Lamination Joints, 3x80 mm, 2 pieces
4 | Ottobock
English