Beckman Coulter StatSpin Express 4 M510 Instructions For Use Manual page 7

Warning
Only reset the cycle counter after conducting the recommended inspections and
service. Resetting the cycle counter without performing the recommended
inspections and service reduces the reliability and safety of the instrument.
Warning
Outside of North America: do not use the power cord supplied. Use power cord for at
least 3.0 Amp with an IEC320/CEE22 female connector and male connector suitable
for the power outlet to be used.
Warning
Picking up or moving the centrifuge during operation can cause injury to the operator
and/or damage to the centrifuge.
Warning
Electromagnetic Wave and Noise
The system generates, uses, and can radiate radio frequency energy. If the system is
not installed and operated correctly, this energy can cause interference with other
equipment. In addition, other equipment can radiate radio frequency energy to
which the system is sensitive. If you suspect interference between the system and
other equipment, Beckman Coulter recommends the following actions to correct the
interference:
Caution
Disconnect the power cord from the electrical outlet before performing maintenance
or inspection.
55-006276-001CC
•
This equipment complies with the emission and immunity requirements described in this
part of the EN/IEC 61326 -1.
•
As to emission, this system has been designed and tested to CISPR 11 Class A, so in a
domestic environment, it may cause radio interference, in which case, you may need to
take measure to mitigate the interference.
•
It is recommended to evaluate the electromagnetic environment prior to operations of
the system.
•
Do not use this system in close proximity to sources of strong electromagnetic radiation
(for example, unshielded intentional RF sources). As they can interfere with the proper
operation.
•
Do not use mobile or cordless telephones and transceivers in the same room as the
system.
•
Do not use medical equipment that can be susceptible to malfunctions caused by Electric
Magnetic Field (EMF) near the system.
Safety Notice
Warnings and Cautions
vii