Nice 7251 Installation And Programming Manual page 57

FUNCTION BUTTON / Defaults
9. Adv. Settings (see previous page)
FUNCTION>DEFAULT MENU:
Returns some or all settings of the gate
operator to the original factory settings:
• System Settings (requires that
system be "re-learned")
• Radio Channel Settings
• Event Settings
• Charger Settings
FUNCTION BUTTON / Gate Sync
GATE SYNC MENU:
In a dual gate system, the actuator nearest the
control box (connected to Motor 1 inputs) has a
substantially shorter cable than that connected to
Motor 2 inputs. This may introduce a noticeable
voltage drop and reduction in speed of Motor 2
actuator compared to the Motor 1 actuator. When
this setting is ON, the control board attempts to
synchronize the run time of both actuators.
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com
7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
FUNCTION
10. Default
11. Gate Sync
(see next page)
Default
OK
System Y
OK
Default
Radio Ch Y
OK
Default
Events Y
OK
Default
OK
Charger Y
10. Defaults (see above)
FUNCTION
11. Gate Sync
12. ESC
OK
Main Display
System Set
YES
to Defaults
NO
Radio Chan. Set
YES
to Defaults
NO
Events Set to
YES
Defaults
NO
Charger Set to
YES
Defaults
NO
Default
OK
Off
OK
ON
OFF
57