3B
7351: ROUTE CHAIN AND CONNECT CHAIN BOLT
1. Route chain through sprockets as shown in IMAGE 3B-1. Make sure chain is level when attached to the
chain brackets. Chain should be aligned with all sprockets.
VIEW FROM
GATE SIDE
IMAGE 3B-1: ROUTING CHAIN THROUGH OPERATOR GEARING
2. Attach the master link to one end of the chain and a chain bolt, then attach the chain bolt to a chain
bracket (IMAGE 3B-2).
3. Determine the required length of chain needed to attach the other chain bolt and still allow adjustment.
4. Using the proper chain breaking tool, cut and remove the excess chain.
5. Attach chain to chain bolt and connect to the second chain bracket.
NOTE: Allow 1 inch of sag per 10 feet of chain.
MASTER
LINK
IMAGE 3B-2: INSTALLING CHAIN BOLT TO CHAIN BRACKETS
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com
7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
TOP VIEW
TOWARD
WASHER
LOCK WASHER
CHAIN BOLT
NUT
CHAIN BRACKET
GATE
WASHER
LOCK WASHER
NUT
17