Nice 7251 Installation And Programming Manual page 35

16: GATE LIMIT LEARNING PROCEDURE (CONT.)
6. Push and hold the OPEN button on Control Board until gate reaches the fully intended open position.
7. OPEN LIMIT ADJUST:
• If gate opens to left (viewing from secure side), adjust left hand knob of limit assembly (IMAGE 17-
5) until the GREEN LED illuminates on control board (IMAGE 17-4).
• If gate opens to right (viewing from secure side), adjust right hand knob of limit assembly (IMAGE
17-5) until the GREEN LED illuminates on control board (IMAGE 17-4).
8. Push and hold the CLOSE button on Control Board until gate reaches the fully intended close position.
9. CLOSE LIMIT ADJUST:
• If gate closes to left (viewing from secure side), adjust left hand knob of limit assembly (IMAGE 17-
5) until the RED LED illuminates on control board (IMAGE 17-4).
LEFT
MOVEMENT
ADJUST
KNOB
MORE LESS
TRAVEL TRAVEL
LEFT LEFT
MORE
TRAVEL
LEFT
LEFT MOVEMENT ADJUST
IMAGE 17-5: GATE LIMIT ASSEMBLY ADJUSTMENT - GATE DIRECTION
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com
7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
TRAVEL
RIGHT
LIMIT KNOBS
LESS
TRAVEL
LEFT
(Continued)
NOTES:
RIGHT
If the wrong limit LED lights (i.e.
MOVEMENT
the close LED lights when gate at
ADJUST
open limit), reverse the limit wires
KNOB
(reverse orange and white) on the
motor motor connector.
If a gate moves in opposite
direction from what is expected,
LESS MORE
reverse the motor power lead
TRAVEL
wiring (red & black wires) for that
RIGHT
motor.
LESS
TRAVEL
RIGHT
RIGHT MOVEMENT ADJUST
MORE
TRAVEL
RIGHT
35