Nice 7251 Installation And Programming Manual page 55

FUNCTION BUTTON / Adv. Settings
8. Standby (see previous page
FUNCTION
9. Adv. Settings
10. Default (see next page)
FUNCTION>ADVANCE SETTINGS MENU:
• LANGUAGE: English only
• CLOCK: Select 12H or 24H clock.
• CONTRAST: Do not set below 20%.
• DIRECTION MOTOR: Changes main
motor direction (Can only be performed in
learn mode). Only used on 24V commercial
operators.
• AUTO CLOSE OPTION: Allows auto close
timer to close from any open position.
• EXIT OPTION: Disables free exit input
when partially open.
• ANTI-TAILGATE:
Closes gate
immediately after vehicle has cleared
safety sensors.
• PHOTO TEST: Factory use only.
• INPUTS: Select LOOP or PHOTO.
(Continued on next page)
NOTES:
• Turning contrast down to less than 20% may
make display unreadable.
• Motor direction adjustable only in Learn
Mode.
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com
7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
OK
Language
English
Clock
24H
Contrast
100%
Direction Motor
->
Auto Close Opt.
On
Exit Opt.
Off
Anti-Tailgate
Off
Photo Test
Off
Inputs
Photo
UL Input
(See next page)
Language
OK
English
(blink)
Clock
OK
24H
(blinking)
Contrast
OK
100%
(blinking)
Direction Motor
OK
->
(blinking)
Auto Close Opt.
OK
On
(blinking)
Exit Opt.
OK
Off
(blinking)
Anti-tailgate
OK
Off
(blinking)
Photo Test
OK
Off
(blinking)
Inputs
OK
Photo
(blinking)
English
English
24 Hour
12 Hour
100%
0%
->
<-
On
Off
On
Off
On
Off
On
Off
Loop
Photo
55