Power Supply; External Supply Voltages; General Information - Bosch Rexroth IndraControl L10 Project Planning Manual

24/54 Bosch Rexroth AG | Electric Drives
Connections and Interfaces
7.2

Power Supply

7.2.1

External Supply Voltages

General Information

PWR IN
and Controls
TheIndraControl L10 as well as any connected function modules and I/O as‐
semblies are supplied with power via the black terminal strip to the right of the
IndraControl L10.
Slot 4:
Fig.7-2: Supply voltage connections
Observe the color-coding of the connectors.
To connect the operating voltages only the power connector inclu‐
ded in the connector set R-IB IL CML S01-PLSET available for the
IndraControl L10 is allowed is allowed. Connector R-IB IL SCN-
PWR IN-CP available for other power terminals is not permitted for
the IndraControl L10 .
This voltage module (PWR IN) is used to feed the following three voltages:
U (24 V power supply), U
LS
Terminal
1.1 +24 VDC segment voltage U
1.2 +24 VDC supply voltage U
1.3 LGND (ground supply voltage)
1.4 and 2.4 FE (functional earth ground)
2.1 and 2.2 +24 VDC supply voltage U
2.3 PGND (ground main and segment voltages)
Fig.7-3: Pin assignment of the voltage module
Five light-emitting diodes are arranged at the upper edge. They have the fol‐
lowing meaning:
Rexroth IndraControl L10 | Project Planning Manual
(24 V segment supply) and U
S
Signal
).
S
is present.
LS
is present.
M
(24 V main supply):
M