Fig. 8-11: Compliance With The Emc Guideline 89/336/Eec; Fig. 8-12: Technical Data Of The Local Bus; Fig. 8-13: Power Supply To The Module Electronics And The Periphery Equipment By The Bus Terminal / Power Terminal; Fig. 8-14: 7.5 V Supply Of The Bus Logic Voltage (U L ) - Bosch Rextroth Indramat RECO R-IB IL CNT Applications Manual

Counter Terminal
Compliance with the EMC Guideline 89/336/EEC
Immunity test according to EN 50082-2
Transient overvoltage (surge)
Interface
Local bus
Power supply to the module electronics and the periphery equipment by the bus terminal / power terminal
Connection method
7.5 V supply of the bus logic voltage (U
Rated voltage
Current input at U
L
Supply ( U , U ) within the 24 V range
S M
Rated voltage
Admissible voltage range
Connection
Comment
The following is connected to the segment circuit U
The following is connected to the main circuit U
Rated power input at U
S
Rated power input at U
M
Power Distribution
Logic voltage
Current input from the local bus
Power input from the local bus
Segment power supply U
S
Rated current input at U
S
Segment power supply U
M
Rated current input at U
M
DOK-CONTRL-R-IL*CNT***-AW02-EN-P
Programming, Technical Data and Ordering Information
Note: Only the deviations to the standard values of the RECO Inline product
family are listed here. The standard values are documented in the
"Planning and Installation of the RECO Inline Product Family" manual.
EN 61000-4-5 /
IEC 61000-4-5

Fig. 8-11: Compliance with the EMC Guideline 89/336/EEC

Via data routing

Fig. 8-12: Technical data of the local bus

Via voltage routing
Fig. 8-13: Power supply to the module electronics and the periphery equipment
by the bus terminal / power terminal
)
L
7.5 V
Usually 40 mA, maximal 50 mA
Fig. 8-14: 7.5 V supply of the bus logic voltage (U
24 V DC
From 19.2 V DC to 30.0 V DC, ripple factor included
Lateral voltage jumpers
: Switch output
S
: Sensor supplies with their own short-circuit protection
M
Maximum 500 mA
Maximum 500 mA
Fig. 8-15: Supply ( U , U
S
7.5 V
50 mA maximum
0.375 W maximum
24 V DC (rated value)
0.5 A maximum
24 V DC (rated value)
0.5 A maximum

Fig. 8-16: Technical data of the power distribution

Criterion B
Signal lines:
0.5 kV voltage supply (asymmetric)
)
L
) within the 24 V range
M
8-5