Compatibility Test - Bosch Rexroth IndraControl L10 Project Planning Manual

Project Planning Manual | Rexroth IndraControl L10
UL/CSA certified
4.5

Compatibility Test

Systems with IndraControl L10 components, that are used in resi‐
dential areas (housing, business and commercial areas as well as
small-sized enterprises), require a single approval by an authority
or a testing agency. In Germany, such single approvals are issued
by the "Regulierungsbehörde für Telekommunikation und Post
(RegTP)" (German Regulatory Authority for Telecommunications
and Posts).
The controls IndraControl L10 are generally certified acc. to
● UL508 (Industrial Control Equipment) and
● C22.2 no. 142-M1987 (CSA)
However, it is possible that there are combinations or extension stages with
restricted or missing certification. Thus, verify the registration according to the
UL marking on the device.
To guarantee an UL/CSA-compliant operation, the following condi‐
tions have to be fulfilled:
● Use 60/75°C insulated copper wire only.
All Rexroth controls and drives are developed and tested according to the latest
state-of-the-art of technology.
As it is impossible to follow the continuing development of all materials (e. g.
lubricants in machine tools) which may interact with our controls and drives, it
cannot be completely ruled out that any reactions with the materials used by
Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test has to
be carried out for new lubricants, cleaning agents etc. and our housings / our
housing materials.
Electric Drives | Bosch Rexroth AG
and Controls
17/54
Technical Data