Advertisement
Quick Links
Quick Reference Guide
For detailed information, please refer to the LNL-1200 tab in the
(49289).
1.0
The Output Control Module Board
The Output Control Module board
contains the following components:
A.
sixteen (16) alarm output
relays with
B.
sixteen (16) corresponding
status LEDs
C. two (2) unsupervised alarm
inputs
D. one (1) RS-485 interface
E.
one (1) power input
F.
eight (8) dip switches
G. three (3) jumpers
H. two (2) status LEDs
LNL-1200
Output Control Module
READYKEYPRO
Hardware Installation Guide
Figure 1: LNL-1200
Advertisement
Related Manuals for Bosch ReadykeyPRO LNL-1200
Summary of Contents for Bosch ReadykeyPRO LNL-1200
- Page 1 LNL-1200 Output Control Module Quick Reference Guide For detailed information, please refer to the LNL-1200 tab in the READYKEYPRO Hardware Installation Guide (49289). The Output Control Module Board The Output Control Module board contains the following components: sixteen (16) alarm output relays with sixteen (16) corresponding status LEDs...
- Page 2 8 data TR 3- TR3+ bits, 1 stop bit. TR3- TR+ TR- OUTPUT CONTROL BOARD Figure 4: RS-485 4-Wire Figure 3: RS-485 2-Wire Communications Communications LNL-1200 Quick Reference Guide 49307C Page 2 © 2006 Bosch Security Systems, Inc.
- Page 3 DIP SWITCH To configure the communication baud rate, set DIP switches 6 and (bps) 7 according to Table 3. 38400 19200 9600 Table 3: Setting Baud Rate LNL-1200 Quick Reference Guide © 2006 Bosch Security Systems, Inc. Page 3 49307C...
- Page 4 RS-485 EOL Terminator Status “ON” Configuration for J1, J2 “Not ON” Configuration for J1, J2 Figure 9: Jumper J5 & J6 Configuration © 2006 Bosch Security Systems, Inc. 49307C 10/06 130 Perinton Parkway, Fairport, NY 14450-9199 USA Quick Reference Guide LNL-1200 Customer Service: (800) 289-0096;...