Disarming Areas - Bosch IUI?MAP0001?2 User Manual

MAP Control Center
Forced arming
Caution!
If you press Force Arm, all active or faulted devices are ignored and the area will be armed.
!
Press this button only if you intend to arm an area without the protection of the affected
devices.
Force Arm is only selectable, if all preconditions are fulfilled to allow arming an area with
active or faulted devices. Depending on regional standards and the system configuration,
these preconditions can differ.
In general, the Force Arm button is activated, if the following preconditions are fulfilled:
–
–
How to force arm
4
5.4

Disarming areas

Notice!
If smartkey or blocklock controls are installed for your system, areas can only be disarmed
with these controls. A control center cannot be used to disarm areas.
To get further assistance:
4
How to open the Disarm menu
4
P
The Disarm menu
–
–
–
How to disarm
1.
2.
3.
P
Bosch Security Systems B.V.
The area contains no devices that are not allowed to be bypassed. These devices have the
information Cannot Bypass During Force Arming.
The system configuration allows that a certain number of devices can be bypassed. These
devices have the information May Bypass.
If you want to arm the area without the devices listed and if the preconditions are
fulfilled, press Force Arm.
For more information, contact your installer or system administrator.
To open the Disarm menu, press
The Disarm menu with three menu options is displayed.
Option 1: Disarm predefined local area
Choose this option to disarm a predefined area in one step. For this option one customer-
specific area can be defined.
Option 2: Disarm All Areas
Choose this option to disarm all configured areas in one step. The configured areas are
defined by the installer for each user.
Option 3: Disarm Selected Areas
Choose this option to disarm one or several areas from a list. Access to blocking time
menu.
Select one of the three menu options to proceed.
The area and their current arming status are displayed. An area is armed and can be
disarmed if the icon is displayed.
To disarm an area, press the desired option or area.
Press .
The area is disarmed.
and .
User manual
Operation | en 15
2019-11 | 08 | F.01U.168.328