Bosch IUI?MAP0001?2 User Manual page 14

14 en | Operation
4
How to open the Arm menu
4
P
The Arm menu
–
–
–
How to arm
4
–
–
How to arm, if area is ready to arm
An area is ready to arm, if the
state.
1.
2.
3.
P
How to make an area ready to arm
An area is not ready to arm, if the
the area.
1.
2.
3.
Notice!
In case a blocking time interval is configured for an area, the
Arm Selected Areas.
4
4
2019-11 | 08 | F.01U.168.328
For more information, contact your installer or system administrator.
To open the Arm menu, press
The Arm menu with three menu options is displayed.
Option 1: Arm predefined local area
Choose this option to arm a predefined area in one step. For this option one customer-
specific area can be defined.
Option 2: Arm All Areas
Choose this option to arm all configured areas in one step. The configured areas are
defined by the installer for each user.
Option 3: Arm Selected Areas
Choose this option to arm one or several areas from a list. Access to blocking time menu.
Select one of the three menu options to proceed.
The area and their current arming possibility are displayed.
An area is ready to arm, if the
An area is not ready to arm, if the
To arm an area that is ready to arm, press the desired option or area.
Press .
A countdown starts, indicating the remaining time to exit the location.
Exit the area within the remaining time of the countdown.
The area is armed.
To arm an area that is not ready to arm, press the desired option or area.
Press .
All active or faulted devices, that either can be bypassed or cannot be bypassed, are
displayed.
Resolve the issues of the listed devices to make this area ready to arm.
To access the Blocking Time menu, select the area and press
For more information on blocking time, refer to Blocking time, page 30.
and .
icon is displayed.
icon is displayed.
icon is displayed. All devices in this area are in normal
icon is displayed. There are active or faulted devices in
User manual
MAP Control Center
icon is displayed under
.
Bosch Security Systems B.V.