Bosch IUI?MAP0001?2 User Manual page 19

MAP Control Center
–
–
–
–
How to reset a passcode
1.
2.
P
P
How to edit a user name
1.
2.
3.
4.
5.
6.
7.
8.
Optional: Smartkey users
Notice!
This option can only be used if a smartkey profile is configured by the installer.
4
How to edit a smartkey user
1.
2.
3.
4.
5.
6.
7.
8.
Bosch Security Systems B.V.
Reset Passcode
Edit User Name
Edit Smartkey User
Edit Control Center User
Press Reset Passcode.
A confirmation message is displayed.
The passcode of the selected user is reset to the default value.
The default passcode is a combination of the 3-digit user ID and a 6-digit password. The
6-digit password default value is 000000. The 3-digit user ID cannot be changed.
A new password has to be entered. For more information, refer to Changing passcode,
page 20.
Press Edit User Name.
The user name options are displayed.
To enter the first name of the user, press Enter User First Name.
Use the alphanumeric keypad to enter the name.
Press Enter.
To enter the last name of the user, press Enter User Last Name.
Use the alphanumeric keypad to enter the name.
Press Enter.
To confirm the first and last name, press
The user options are displayed.
For more information, contact your installer or system administrator.
Press Edit Smartkey User.
The smartkey options are displayed.
To enter the ID of the smartkey token, press Enter Smartkey Token Number.
Use the alphanumeric keypad to enter the 8-character ID found on the smartkey token in
the Enter field.
To confirm, press .
To verify, use the alphanumeric keypad to enter the 8-character ID found on the smartkey
token in the Verify Code field.
To confirm the ID, press
The smartkey options are displayed.
Press Select Smartkey Profile.
The predefined smartkey profiles are displayed. If no predefined smartkey profile is
available, an error message is displayed.
Select a predefined smartkey profile.
.
.
User manual
Operation | en 19
2019-11 | 08 | F.01U.168.328