Table of Contents
Advertisement
26
en | Operation
P
How to view version information
4
P
5.8.3
Enabling/disabling device
Notice!
When a device is disabled, no events will be displayed for this device anymore. Per default,
only installers or users authorized by an installer can disable devices.
4
4
How to open the Service menu
4
P
How to enable or disable a device
The area, in which the device is installed, is not armed.
1.
2.
P
5.8.4
Setting time and date
How to open the Service menu
4
P
How to set time and date
1.
2.
3.
P
5.8.5
Walk test
Notice!
Walk tests can only be executed by installers or users authorized by an installer.
4
2019-11 | 08 | F.01U.168.328
The Service menu with twelve menu options is displayed.
Press View Version Information.
The firmware and the hardware version of the control panel and the firmware version of
the control center are displayed.
For more information, contact your installer or system administrator.
For information on how to bypass a device instead of removing it, refer to Bypassing/
unbypassing devices, page 23.
To open the Service menu, press
The Service menu with twelve menu options is displayed.
Press Enable/Disable Device.
All installed devices are displayed.
Press the device you want to enable or disable. You can also search for devices by name
or filter enabled and disabled devices and devices with faults.
The
icon indicates that the device is enabled. The
control panel indicate that the device is disabled.
To open the Service menu, press
The Service menu with twelve menu options is displayed.
Press Set Time and Date.
To set the time and date, use the Date, Hours and Minutes buttons and the
icons.
To confirm, press
.
Time and date are set.
For more information, contact your installer or system administrator.
and
.
and
.
User manual
MAP Control Center
icon and the yellow LED on the
Bosch Security Systems B.V.
and the
Advertisement
Table of Contents
