Table of Contents
Advertisement
30
en | Operation
How to open the Service menu
4
P
How to enable or disable the manufacturer authorization
1.
2.
P
5.8.10
Adjusting volume/brightness
How to open the Service menu
4
P
How to adjust the volume and brightness of the control center
1.
2.
3.
P
5.8.11
Setting chime mode
The chime mode is usually configured to indicate that a door has been opened. When the
chime mode is enabled, the control center beeps once in case a door in the local area is
opened.
How to open the Service menu
4
P
How to enable or disable the chime mode
1.
2.
P
5.8.12
Blocking time
The blocking time is restricting the time period in which a user is allowed to disarm an area.
The blocking time is configured by the installer. Up to three blocking time intervals per day for
which disarming is allowed can be configured. These three blocking time intervals can be
edited by the user up to seven days in advance.
If no blocking time intervals are configured by the installer, disarming is allowed at any time,
provided disarming is not restricted due to other reasons.
How to enable editing blocking time mode
Editing blocking time can only be enabled by an installer during installer mode.
2019-11 | 08 | F.01U.168.328
To open the Service menu, press
The Service menu with twelve menu options is displayed.
Press Manufacturer Authorization.
The Manufacturer Authorization button is displayed.
To enable or disable the manufacturer authorization, press the Manufacturer
Authorization button.
The
icon indicates that the manufacturer authorization is granted. The
indicates that the manufacturer authorization is not granted.
To open the Service menu, press
The Service menu with twelve menu options is displayed.
Press Adjust Volume/Brightness.
To adjust the volume, press the Volume button and use the
Adjust the brightness, press the Brightness button and use the
Volume and brightness are adjusted.
To open the Service menu, press
The Service menu with twelve menu options is displayed.
Press Chime Mode On/Off.
The Chime Mode On/Off button is displayed.
To enable or disable the chime mode, press the Chime Mode On/Off button.
The
icon indicates that the chime mode is enabled. The
chime mode is disabled.
and
.
and
.
and
.
User manual
MAP Control Center
icon
and the
icons.
and the
icons.
icon indicates that the
Bosch Security Systems B.V.
Advertisement
Table of Contents
Need help?
Do you have a question about the IUI?MAP0001?2 and is the answer not in the manual?