Event History - Bosch IUI?MAP0001?2 User Manual

24 en | Operation
–
–
–
–
–
–
5.8.1

Event history

How to open the Service menu
4
P
How to view the event history options
4
The following options are available:
–
–
–
–
–
How to view the history
4
P
Notice!
Not only events of the system devices are displayed, but all system activity. For example,
arming and disarming, system trouble and system tampers. By default, events of the last 24
hours are displayed.
4
4
How to print the history
The system printer is connected and ready to print.
4
P
2019-11 | 08 | F.01U.168.328
Option 7: Bell and Indicator Test
Choose this option to start a bell test of connected signaling devices and an indicator test
of the control center.
Option 8: Change/View Output State
Choose this option to change and to view the output state.
Option 9: Manufacturer Authorization
Choose this option to enable manufacturer user authorization for a defined period of
time.
Option 10: Adjust Volume/Brightness
Choose this option to set the volume and the brightness of the control center.
Option 11: Chime Mode On/Off
Choose this option to enable an acoustic signal on the control center in case a door is
opened in the local area.
Option 12: Enable Blocking Time Editing
Choose this option as an installer in installer mode to enable the blocking time editing.
To open the Service menu, press
The Service menu with twelve menu options is displayed.
Press Event History.
The event history options are displayed.
View History
Print History
Filter By Date Range
Filter By Event Type
Sort By
Press View History.
The events stored in the history memory of the control panel are displayed.
For information on how to view events from more than 24 hours ago, refer to How to filter
the history by date range, page 25.
For information on how to view device events, refer to Event memory, page 32.
Press Print History.
A confirmation message is displayed.
All walk test events are printed on the system printer.
and .
User manual
MAP Control Center
Bosch Security Systems B.V.