Table of Contents
Advertisement
MAP Control Center
4
Getting started
This chapter describes how to log in and off.
4.1
Idle mode
When the control center is not in use, an idle screen is displayed.
How to remove the idle screen
4
4.2
Logging in
How to log in
1.
2.
Invalid passcode
If the passcode is not correct, an error message is displayed.
4
When an incorrect passcode has been entered ten times, the control center is locked for two
minutes per default. These values can be configured by the installer.
How to reset the password
4
4
4.3
Logging off
How to log off
4
Automatic log off
A user is logged off automatically if there has been no activity for two minutes. This value can
be configured by the installer.
4
Bosch Security Systems B.V.
To remove the idle mode and to view the login screen, touch the screen.
To view the login screen, tap the screen.
In the passcode field, enter your passcode.
The user passcode is a combination of the 3-digit user ID and a 6-digit password (e.g.
004 123456).
If the passcode is correct, the Main Menu is displayed.
To empty the passcode field, press
For more information on how to reset a password, refer to How to reset a passcode, page
19.
For more information, contact your installer or system administrator.
To log off, press
.
For more information, contact your installer or system administrator.
.
User manual
Getting started | en
11
2019-11 | 08 | F.01U.168.328
Advertisement
Table of Contents
