GE Agile P50 Series Technical Manual page 64

P50 Agile P153
Overcurrent
Enabled
Neg Sequence O/C
Disabled
Broken Conductor
Disabled
Earth Fault 1
Enabled
Earth Fault 2
Enabled
Thermal Overload
Disabled
Cold Load Pickup
Disabled
Measure't setup
ABC
UnderCurr Prot
Disabled
P153/EN M/B
Editable setting
By using the (5) or (6) key, Over Current can be Enabled or
Disabled.
Editable setting
By using the (5) or (6) key, Negative Sequence O/C can be Enabled
or Disabled.
Editable setting
By using the (5) or (6) key, Broken conductor can be Enabled or
Disabled.
Editable setting
By using the (5) or (6) key, Earth Fault 1 can be Enabled or Disabled.
Editable setting
By using the (5) or (6) key, Earth Fault 2 can be Enabled or Disabled.
Editable setting
By using the (5) or (6) key, Thermal Overload can be Enabled or
Disabled.
Editable setting
By using the (5) or (6) key, Cold Load Pickup can be Enabled or
Disabled.
Editable setting
By using the (5) or (6) key, Measurement Setup can be set as ABC /
RYB.
Editable setting
By using the (5) or (6) key, Under Current Protection can be
Enabled or Disabled.
5 Configuration
5-26