GE Agile P50 Series Technical Manual page 145

P50 Agile P153
2.4.24.2 View/Edit Settings (I>1 Function)
(*)
tcold Time Delay
7200 S
(*)
tclp Time Delay
7200 S
(*)
I>1 Status
Enabled
NOTE:
If the IEC Curve is selected
for Over Current Protection
setting.
(*) I>1 Current Set
1.00 A
(*)
I>1 TMS
1.000
Note:
(*) indicates Edit key used to modify settings. Refer to the View and Edit settings
P153/EN M/B
COLD LOAD PKP
(*)
(*)
3
SAVE Settings
DISCARD Settings CLEAR
The settings of I>2 Status, I>3 Status, IN1>1 Status, IN1>2 Status, IN1>3 Status, IN2>1
Status, IN2>2 Status, IN2>3 Status can be set in similar manner as that of I>1 Status.
section.
GROUP 1
4
NOTE:
If the IEEE Curve is selected
for Over Current Protection
setting.
I>1 Current Set
1.00 A
I>1 Time Dial
1.00
3
For Save
4
CLEAR For Cancel
5 Configuration
NOTE:
If the DT Curve is selected
for Over Current Protection
setting.
(*)
I>1 Current Set
1.00 A
(*)
I>1 Time Delay
1.00 S
(*)
EDIT
5-107