GE Agile P50 Series Technical Manual page 41

P50 Agile P153
1 CHAPTER OVERVIEW
This chapter consists of the following sections:
P153/EN M/B
1 Chapter Overview
2 Configuration
2.1 Changing the Settings
2.2 Password Entry
2.3 Menus
2.3.1 Default Display
2.3.2 Main Menu Contents
2.3.3 System Data Menu
2.3.3.1 View / Edit Settings
2.3.4 View Records Menu
2.3.4.1 View Records Menu Contents
2.3.4.2 View Fault Records
2.3.4.3 View Event Records
2.3.4.4 View Maintenance Records
2.3.4.5 View Alarm Records
2.3.5 Measurement Menu
2.3.5.1 View Contents
2.3.6 CB Control Menu
2.3.6.1 View/Edit Settings (if all settings are disabled)
2.3.6.2 View/Edit Settings (if all settings are enabled)
2.3.7 Date and Time Menu
2.3.7.1 Edit Settings (if the settings are disabled)
2.3.7.2 Edit Settings (if the settings are enabled)
2.3.8 Configuration Menu
2.3.8.1 View/Edit Settings
2.3.9 Transformer Ratios Menu
2.3.9.1 View/Edit Settings
2.3.10 Record Control Menu
2.3.10.1 View/Edit Settings
2.3.11 Communication Menu
2.3.11.1 View/Edit Settings
2.3.12 I/O Configuration Menu
2.3.12.1 View/Edit Settings
2.3.12.2 List of the submenus for Relay Output, LEDs and AND Logic configuration
2.3.13 O/P Relay Configuration Menu
2.3.13.1 View/Edit Settings
2.3.14 Disturbance Record Menu
2.3.14.1 View/Edit Settings
2.3.15 Commissioning Test Menu
2.3.15.1 View/Edit Settings
2.3.16 Group 1 Menu
2.3.16.1 Edit Settings
2.3.16.2 Group1 –System Configuration Submenu
2.3.16.3 Group1 –Overcurrent Submenu
2.3.16.4 Group1 –Negative Sequence Overcurrent Submenu
2.3.16.5 Group1 –Broken Conductor Submenu
2.3.16.6 Group 1 – Earth Fault 1 Submenu
2.3.16.7 Group1 – Earth Fault 2 Submenu
2.3.16.8 Group1 –Thermal Overload Submenu
2.3.16.9 Group1 – Cold Load Pickup Submenu
2.3.16.10 Group1 –Undercurrent Submenu
2.3.16.11 Group 1 – CB Fail Submenu
5 Configuration
5-3