GE Agile P50 Series Technical Manual page 259

P50 Agile P153
2. Auxiliary Supply tests
D.C. voltage dips
2.1
DC voltage
2.2
interruption
2.3 AC voltage dips
A.C. voltage
2.4
interruption
AC (ripple) in DC
2.5
supply
Gradual shutdown/
2.6
start-up test
Reversal of DC power
2.7
supply polarity test
3. Emission tests
Radiated emission
3.1
test
Conducted
3.2
emission test
P153/EN M/B
IEC 61000-4-29 Class A Residual voltage
IEC60255-26(ed3.0)- 1) At 40% for 200ms. 2) At 70% for 500ms.
2013
1) DC auxiliary supply interruptions for 10, 20ms with no loss of protection.
IEC 61000-4-29 Class A
IEC60255-26(ed3.0)- 2) DC auxiliary supply interruptions 30ms, 50ms, 100ms, 200ms, 300ms, 0.5s, 1s,
2013
5s with temporary loss of protection.
Residual voltage
IEC 61000-4-11 Class A
1) At 40% for 200ms. 2) At 70% for 500ms.
IEC60255-26(ed3.0)-
2013
3) At 80% for 5s.
IEC 61000-4-11 Class A 1) AC auxiliary supply interruptions for 10, 20ms with no loss of protection.
IEC60255-26(ed3.0)- 2) AC auxiliary supply interruptions for 50ms, 100ms, 200ms, 0.5s, 5s with
2013 temporary loss of protection.
IEC 60255-11, Level: 15%
IEC60255-26(ed3.0)-
Frequency: 100/120 Hz
2013
The unit must power down and up correctly with no mal operation.
IEC60255-26(ed3.0)-
Shut down time
2013
Power off time
Startup time
IEC 60255-11
Product shall withstand for 1 minute with Reverse polarity of power supply inputs.
The EUT shall satisfy the requirement of this specification.
Radiation measured at a distance of 10 meter.
EN55022:2006+A1:2007
Frequency range
IEC60255-26(ed3.0)-2013
30 MHz – 230 MHz
230 MHz – 1000 MHz
EUT condition
The EUT shall satisfy the requirement of this specification.
Frequency range
0.15 – 0.5 MHz
IEC60255-26(ed3.0)-2013
0.5 – 30 MHz
EUT Condition
13 Technical Specifications
60 s
5 min.
60 s
Limits
40 dB (µV/m)
47 dB (µV/m)
Energised
Limits
79 dB/µV (Quasi peak)
66 dB/µV (Average)
73 dB/µV (Quasi peak)
60 dB/µV (Average)
Energised
13-9