This Is How You Install A Software Backup Using The Boot System - Siemens SINUMERIK 828D Series Software And Hardware Service Manual

3.5.2

This is how you install a software backup using the boot system

Overview
If a CompactFlash Card with a boot system is used as system CompactFlash Card, the system
software or a previously generated software backup must still be transferred.
Note
Licenses
The boot system does not contain a license key; a valid license key must be transferred to the
control. When replacing a system CompactFlash Card, this must be requested again (see also:
This is how you license a CNC option (Page 62)).
All system data and user data are overwritten with the system image.
Updating the software
After you have inserted the CompactFlash Card with the boot system as new system
CompactFlash card (see Replacing the system CompactFlash Card (Page 88)) proceed as
follows:
1. Switch the control on. When booting, the following display appears:
2. Press the <INPUT> key to confirm your selection.
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1
3.5 Generating a boot system on the CompactFlash card
Service cases - software
59