This Is How You Read In A Setup Archive From The System Compactflash Card - Siemens SINUMERIK 828D Series Software And Hardware Service Manual

5. Select the desired control components.
Note
Easy Archive
● Select all of the components, unless it is known that individual components do not
● Select all data classes, unless only certain data (e.g. INDIVIDUAL) are to be backed up.
6. Press the "OK" softkey to create an archive.
The "Create archive: Select Archive" window opens.
7. Select the storage location of the archive:
"Archives": Internal memory on the CompactFlash Card system
8. Select a directory.
Example: "Archives" → "Manufacturer"
- OR -
9. Press the "New directory" softkey to generate a new directory.
The "New Directory" window opens.
10.Enter the required name and confirm with "OK."
The directory is created subordinate to the selected folder.
11.Press the "OK" softkey.
The "Create archive: Name" window opens.
12.Enter the required name and confirm with "OK."
A file with the ARD format type is saved in the selected directory.
3.2.4

This is how you read in a setup archive from the system CompactFlash card

Reading in an archive from the system CompactFlash Card
A description is provided here how you read in a series setup archive in order to be able to
restore the previous state of the machine.
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1
deviate from the Siemens standard.
Service cases - software
3.2 Generating a commissioning archive
41