Smc30 Connections; This Is How You Remove An Smc30 - Siemens SINUMERIK 828D Series Software And Hardware Service Manual

4.16.6

SMC30 connections

Connections
X500
X524
X520, X521,
X531
Figure 4-52
4.16.7

This is how you remove an SMC30

Overview
The activities that must be taken into account when replacing an SMC30 are subsequently
described.
If an SMC30 has a hardware defect, then it must be replaced by an identical module.
Preconditions:
● The module is defective and must be replaced.
● The control cabinet is in a no-voltage condition, all of the connectors and cables are labeled.
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1
DRIVE-CLiQ
Electronics power supply
Encoder system interfaces: HTL, TTL, with track monitoring SSI
Connections SMC30
Service cases - hardware
4.16 Sensor Modules Cabinet
207