This Is How You Remove The Mcp 310C Pn - Siemens SINUMERIK 828D Series Software And Hardware Service Manual

Service cases - hardware
4.5 Machine control panels
4.5.10

This is how you remove the MCP 310C PN

Overview
The activities that must be taken into account when replacing a machine control panel are
subsequently described.
If the machine control panel has a hardware defect, then it must be replaced by an identical
replacement part.
Preconditions:
● The module is defective and must be replaced.
● The control cabinet is in a no-voltage condition, all of the connectors and cables are labeled.
104
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1