Siemens SINUMERIK 828D Series Software And Hardware Service Manual page 36

Service cases - software
3.2 Generating a commissioning archive
3. Press the "Setup archive" softkey.
4. Activate "Create setup archive".
The "Create setup archive" window opens.
5. Select the desired control components.
Note
Easy Archive
● Select all of the components, unless it is known that individual components do not
● Select all data classes, unless only certain data (e.g. INDIVIDUAL) are to be backed up.
6. Press the "OK" softkey to create the archive.
The "Create Archive: Select Archive" window opens.
7. Select the storage location of the archive:
– USER USB: USB-FlashDrive in slot X125 at the front
– User CF: CompactFlash Card in the slot at the front
36
deviate from the Siemens standard.
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1