Figure 46 - Modscan32 Connected To Modbus Device With Registers 4113 And 4114 On Display (Rollover Count); Figure 47 - Modscan32 Connected To Modbus Device With Register 4115 On Display (Ceiling Value) - FCI MT100 Installation, Operation And Maintenance Manual

MT100 Multipoint Flow Meter
Checking the Totalizer 2 (Upper Count/Rollover Count) Value
● Repeat step 1 above, but specifying register #4113 (and #4114) instead.
● Repeat step 2 above (no need to change serial configuration if already configured).
● See figure below for a "Rollover count" number example.
Figure 46 – ModScan32 Connected to Modbus Device with Registers 4113 and 4114 on Display (Rollover Count)
Checking/Setting the Totalizer Max. Value
● Repeat step 1 above, but specifying register #4115 (and #4116) instead.
● Repeat step 2 above (no need to change serial configuration if already configured).
● See figure below for a "Ceiling value" number example.
Figure 47 – ModScan32 Connected to Modbus Device with Register 4115 on Display (Ceiling Value)
Fluid Components International LLC
OPERATION
79