Appendix Adrawings; Table 29 - Mt100 Drawings In Appendix A - FCI MT100 Installation, Operation And Maintenance Manual

MT100 Multipoint Flow Meter
APPENDIX A
This appendix contains MT100 technical drawings.
Dwg. No. Dwg. Type
025908 System
405037 Outline Instl.
405038 Outline Instl.
405039 Outline Instl.
405040 Outline Instl.
405041 Outline Instl.
405042 Outline Instl.
405043 Outline Instl.
405044 Outline Instl.
025993 Wiring Dgm.
025994 Wiring Dgm.
Fluid Components International LLC
DRAWINGS
Table 29 – MT100 Drawings in Appendix A
Page No.
99 MT100 FM System Certification, FM US/CA, ATEX, IECEx
111 MT100M: Flanged Process Connection, Hazardous Locations, Local And Remote
113 MT100M: 2" NPT Process Connection, Hazardous Locations, Local And Remote
115 MT100M: Duct Flange Process Connection, Hazardous Locations, Local And Remote
119 MT100S: Compression Fitting, Hazardous Locations, Local And Remote
121 MT100S: Flanged Compression Fitting, Hazardous Locations, Local And Remote
123 MT100S: Low Press. Packing Gland, 1-¼" NPT, Hazardous Locations, Local And Remote
125 MT100S: Low Press. Packing Gland, Flanged, Hazardous Locations, Local And Remote
127 MT100S: Med. Press. Packing Gland, 1-¼" NPT, Hazardous Locations, Local And Remote
129 MT100M Wiring Diagram
133 MT100S Wiring Diagram
Table 29 below summarizes the drawings.
Description
APPENDIX A – DRAWINGS
97