Table of Contents
Advertisement
■[F 1] Setting of OUT1
Set output method of OUT1.
The output turns on when the pressure exceeds the set value. The default setting of the output set value is
the central value between the atmospheric pressure and the upper limit of the rated pressure range.
The display colour depends on the condition of OUT1.
The default setting of the display colour is as follows: green display when the output is ON and red display
when the output is OFF.
For the operation of each setting item, refer to "List of output modes" on page 30.
<Operation>
Press the
or
button in function selection mode to display [F 1].
Select output mode
or
Press the
button to select output mode.
Press the
button to set.
Select reversed output
or
Press the
button to
select reversed output.
Press the
button to set.
Pressure Setting
Set the pressure based on the setting procedure on page 24.
"P" becomes "n" when reversed output is selected. ([P_1] [n_1])
Hysteresis mode: [P_1]
Window comparator mode: [P1L][P1H]
Press the
button to set.
Press the
button.
Move on to setting of output mode.
Move on to setting of reversed output.
Move on to setting of pressure.
Move on to setting of hysteresis.
-28-
[oFF] (unused)
selected.
Press the
button
to set.
Move on to
setting of display
colour.
No.PS※※-OMM0007-H
Hide quick links:
Advertisement
Table of Contents
